Sunday, February 15, 2009

Burnt Out

As I was trying to figure out what to write about for my physics blog, I happened to look up and stare at the chandelier. I noticed that the light bulb was burnt out and when I thought about the light bulb, I thought about why the light bulb was no longer bright like its companions.
Inside a light bulb is a filament that glows from heat energy from excited electrons that gets converted into light energy as those electrons are travelling through the filament. The filament has a high boiling point so that it can take more electrons before the electrons are converted into light energy. The filament is very twisted to create a higher resistance so that the electrons have a harder time travelling through it. Resistance relies on the wire's length, cross-sectional area and the resistivity of the material. The filament is actually very long because it was curled tightly. At some point the filament is no longer usable, making the lightbulb die.
All of the other lightbulbs are very bright. They have a current running through them. Current depends on the voltage difference and the resistance. Current can also be calculated by the charge in coulombs divided by the amount of time.
In the picture, I didn't draw all of the light bulbs.

Sunday, February 1, 2009

Scary Physics

When I plug something in, sometimes I see a small bolt of lightning coming from the electrical outlet or I hear a pop kind of sound. It was kind of scary to see the electricity fly like that, but I know for sure that I am safe as long as I don't touch the metal. The metal conducts the electricity, but the electrons don't travel all around the plug part because the part I hold onto is made out of plastic. Plastic is an insulator, meaning the charge does not move to other regions of the object. If it is a colder day, then I'll see the bolt, but if it's less cold then I'll hear the pop. When it is colder and the humidity is low, objects can retain their charge imbalances longer, so the need to become neutral is greater. The outlet gives the excess electrons happily to my plug.
If I were to touch the metal part of the plug as I put it into the wall, I would get electrocuted as my fingers received the electrons. Depending on the voltage, I would receive a certain amount of joules per one coulomb of electrons, which is 6.25e18 electrons. So if the voltage was 200 volts, then I would receive 200 joules of energy per one coulomb of electrons.
It's kind of hard to see my bolt of electricity in the picture, but it's there.

Sunday, January 25, 2009

Static Electricity Fun

When my little brother, Ty, was around three or four years old, my older siblings and I liked to rub balloons that we got from parties on his head. It would work really well; we always got hair to connect to the balloon. We knew it was static electricity, but I did not know how it worked. Now I know! So when we rubbed the balloon on his head, we created friction. Electrons from his hair transferred to the balloon, making the balloon negatively charged. From losing electrons, Ty's hair became positively charged. The balloon and his hair were attracted to each other because they wanted to become neutral, so when we pulled the balloon a little away from his head, the hair stuck to the balloon.
The balloon is an insulator, meaning the part that rubbed against his head is the only part of the balloon that was charged. If we had turned the balloon around, the hair would not have stuck to it.
I have another story that is more recent for static electricity. In New York over winter break, the weather was really cold and dry. Arushi and I kept on accidentally shocking each other during the trip. Even if we were wearing all our layers and our coats, we would shock each other. Because objects can keep their charge imbalances longer where there is low humidity, like New York in the winter, we would shock each other as our electrons from our skin or the material transferred everywhere, making everything positively or negatively charged.

Wednesday, January 7, 2009

Physics in NY


While I was in New York, I noticed many things related to science, like how I could shock other people and vice versa...but I don't know if there's any physics in that, so I choose to write about friction.

I wore boots all the time (because they were warm) but they didn't have a lot of grip on the bottom, so I could slide on smooth tile. Whenever I walked in the hotel lobby where there was tile, there was not a lot of friction between my boot and the floor. It was during the trip when I started to understand why I would not be able to go anywhere controlled if there was no friction. My boot had a harder time gripping the floor and pushing against it to keep moving forward. I had to exert a little more force downward.

I also noticed how great friction is after the zamboni cleaned the ice rink at Central Park. Before they clean the ice, there are a lot of chipped and shaved ice on the rink and the ice itself has marks in it from previous skaters' shoes. It's easier to skate when the ice rink has the marks because they provide friction. After the ice is cleaned, it is smooth. When I stepped onto the clean ice, I almost fell over because my feet were continuing to more without the rest of my body.

The picture is of ice skating.

Monday, December 15, 2008

The Pique Turn

In ballet, we did pique turns across the floor. At the time, I was not thinking torque, but there was certainly a lot of physics at work. So...What keeps a dancer from falling?????
To successfully complete a pique turn, there are certain things that a dancer has to be aware of, such as body placement. We say to bend the knee to push off the ground, pull up, have straight legs, hold the arms up, spot so we know where we're going and to not get dizzy, turn the knee out, hold the head up...
and in physics this would mean...!
In the first step, in order to even get up en pointe and balance, the dancer in the picture has to bend her knee. This provides a force for the dancer to push off the ground. This force is also what helps get the dancer to turn...torque!
By step two, the dancer need to have a center of balance, a center of mass. Everything need to be in line over the box of the shoe (which is the part that the dancer stands on). If the dancer leans to much back, side, or front, then she'll fall because her weight would not be on her center of mass.
During the turn, the dancer can't change any of her body position because that would throw her turn off. If she can hold her placement, she can do multiple turns before landing!
When she lands, she needs to continue to keep everything in line over her center of mass in order to land neatly in a fifth position. By bending her knees, the shock of landing is more easily absorded.

Sunday, November 23, 2008

Ultimate Frisbee Fun in Physics

This past week we played Ultimate Frisbee for PE in the Upper Gym. It's a very intense game. It also has a lot of physics in it, but I can't yet identify all of what's going on.
Anyway the first thing is the change in momentum when the frisbee is caught. Once the frisbee is thrown in the air, it has momentum, which is mass multiplied with velocity. The change in momentum is the velocity change times the mass. I don't know the frisbee's original velocity when it's flying in the air, but it goes from that to zero m/s, thus changing the frisbee's momentum. Because the frisbee experienced a change in momentum, it also felt impulse, which is force multiplied with time.

During the game, people sometimes collided with each other. For example, a girl was trying to catch the frisbee and score a point for her team, but then the boy on the other team jumped up in the air and caught it before she could. Then when he came down from his jump, he hit her and she fell down. She was stationary, so when he came down, his momentum is transferred to her because momentum is conserved in collisions.

For another example, I tried to intercept the frisbee from reaching the opposite team, so I ran up behind this one guy and he moved back unexpectantly. I had stopped running at that point, so when he moved back, I fell. He had more momentum than me, so I failed to intercept the frisbee. It was also a bouncy collision because he did not fall with me. If he had, then he would not have caught the frisbee.

Ultimate frisbee is a good game, especially when your team wins. By the way, that rectangle on the side of the picture that's blue and white on the inside is supposed to be the door with the stairs that go down by the I Building.

Sunday, November 2, 2008

Ballet Yay!

During one Saturday dance class, we all tried to slide into a right/left split while standing up en pointe. It was difficult because we were not doing it correctly and also that we were afraid of falling.
The teacher (who is also a biochemist, i think) explained to us that we needed to put more weight on our back leg so that we would not be pushing into the ground. She also told us that we needed to slide on the side of the shoe rather than the top of the box (the part of the shoe that you balance on).

We were trying to stand on the pointe and slide at the same time, which is hard because then we were pushing our weight into the shoe in an effort to stay balanced. By putting more force down into the shoe, the floor is pushing back, keeping us from sliding. Also, there is more surface area at the point of the shoe as compared to the side of the box, making more friction between the shoe and the floor.

When we tried putting more of our weight on our back leg and sliding on the side of the shoe on the other leg, our back leg could support us while the front foot slid easily across the floor until we fell into a split.
That was rather confusing to explain in writing...It is much easier to show this sort of thing, so I'm sorry if it does not make sense!